DIL48/TSOP56 ZIF 18.4mm NOR-4

Một số model sản phẩm khác :
DIL48/BGA63-1 ZIF NAND-1,
DIL48/TSOP56 ZIF NOR-11,
DIL48/QFP112 ZIF HCS12-2,
DIL48/SSOP56 ZIF Flash-3,
DIL48/QFP48 ZIF LPC-1,
DIL48/DIL48 ZIF AddCap,
DIL48/QFP100 ZIF STM32-5,
DIL48/PLCC68 ZIF PLD-1,
DIL48/QFP100 ZIF PLD-4,
DIL48/QFP208 ZIF STM32,
DIL48/QFP64 ZIF MSP430-1,
DIL48/QFP144 ZIF HCS12-1,
DIL48/PLCC84 ZIF PLD-1,
DIL48/TSSOP48-240 ZIF MSP430-1,
DIL48/VQFN32 ZIF XMEGA-1,
DIL48/QFN20-5 ZIF STM32
Adapter manual :
-
Protect the contacts of adapter connectors and ZIF socket from contamination. Any dirt and/or fat on contacts may cause errors during programming.
-
Usage of vacuum pick-up tool is expected for device handling.
-
Proceed with care! Incorrect insertion of adapter in programmer ZIF socket or device in adapter ZIF socket may lead to programmed device damage.
-
Insert adapter into programmer ZIF socket. If you are in doubts about orientation of the adapter in programmer ZIF socket, there is a rule of thumb – orientation of adapter name text is the same as orientation of the text on the top of programmer.
-
Visually check the placement of adapter in programmer ZIF socket.
-
Push the cover of adapter ZIF socket (the topmost movable part) to open the socket. Insert the device into adapter ZIF socket. Correct position of programmed device in adapter ZIF socket is indicated by picture near (usually on left above) the adapter ZIF socket. On that picture, reference corner of device (e.g. position of pin 1) is indicated by dot, by number 1, by bevelled corner or by any combination of mentioned. Then release adapter ZIF socket.
-
Do not press on device while inserting it and/or releasing the cover.
-
Visually check the placement of programmed device in adapter ZIF socket. If everything looks OK, the device is ready for programming.
-
To take out the device from adapter, push the cover of adapter ZIF socket and remove the device.
-
When you finish the work with adapter, remove it from programmer ZIF socket.
-
Operating conditions: temperature 5°C ÷ 40°C (41°F ÷ 104°F), humidity 20% ÷ 80% non-condensing.
Tudongvina.com cung cấp tất cả các loại DIL48/TSOP56 ZIF 18.4mm NOR-4 trên thị trường. Liên hệ để tìm và nhận báo giá DIL48/TSOP56 ZIF 18.4mm NOR-4 bạn đang cần.
Công ty chúng tôi chuyên cung cấp tất cả các loại vật tư – thiết bị dùng trong Công Nghiệp:
- Từ các linh kiện phụ kiện nhỏ dùng để sửa chữa thay thế cho đến máy móc nguyên chiếc dùng trong tự động hóa…
- Từ mặt hàng phổ thông cho tới các linh kiện khó tìm hiếm có nhất…
- Mua càng nhiều giá càng rẻ!
- Hàng hóa có xuất hóa đơn VAT và phiếu bảo hành đầy đủ.


: 0358 565 504
: 979 013579 8888
1012 414 927