Bơm cánh gạt ANSON VP5F-A5-50
Một số model sản phẩm khác :
VP5F-A5-50S,
VP5F-A5-50,
VP5F-A4-50S,
VP5F-A4-50,
VP5F-A3-50S,
VP5F-A3-50,
VP5F-B5-50S,
VP5F-B5-50,
VP5F-B4-50S,
VP5F-B4-50,
VP5F-B3-50S,
VP5F-B3-50,
HVP-40-FA3(140KG),
HVP-30-FA3(140KG),
HVP-20-FA3(140KG),
VDC-1A-F40D-20,
VDC-1A-F30D-20,
VDC-1A-F20D-20,
VP5F-A4-50S,
VP5F-A5-50S,
VDC-1A-F40D-9T,
VDC-1A-F30D-9T,
VP-08-F/A3,
VP-08-F/A3,
VP-08-F/A3,
VP-08-F/A3,
VP-12-F/A3,
VP-12-F/A3,
VP-12-F/A3,
VP-12-F/A3,
VP-15-F/A3,
VP-15-F/A3,
VP-15-F/A3,
VP-15-F/A3,
VP1-12-35,
VP1-12-55,
VP1-12-70,
VP1-15-35,
VP1-15-55,
VP1-15-70,
VP1-20-35,
VP1-20-55,
VP1-20-70,
VP2-30-35,
VP2-30-55,
VP2-30-70,
VP2-40-35,
VP2-40-55,
VP2-40-70
Specifications :
- Pump Type: Variable Displacement Single Vane Pump.
- Displacement: 16.6 cm³/rev (geometric volume per revolution).
- Nominal Flow Rate: 30 L/min (measured at 3.5 bar and a motor speed of 1800 rpm).
- Pressure Adjustment Range: 30 to 70 bar (regulated via the built-in pressure adjuster on the pump body).
- Maximum Rotation Speed: 1800 rpm.
- Minimum Rotation Speed: 800 rpm.
- Direction of Rotation: Clockwise (when viewed from the shaft end).
- Shaft Type: Straight shaft with Woodruff key (shaft diameter is 19.05 mm).
- Flange Pilot Diameter: 95.02 mm (centering ridge for motor flange mounting).
- Mounting Bolt Slots: 2-bolt flange for M12 bolts, with a center-to-center distance of 113 mm.
- Suction Port (Inlet): PT 3/4 thread standard.
- Discharge Port (Outlet): PT 1/2 thread standard.
- Case Drain Port: PT 1/4 thread standard (must be piped directly back to the tank to prevent seal failure).
- Net Weight: 9.4 kg (dry weight without hydraulic fluid).
- Recommended Hydraulic Fluid: Anti-wear hydraulic oil ISO VG32 or ISO VG46.
Tudongvina.Com cung cấp tất cả các loại Bơm ANSON VP5F-A5-50 trên thị trường. Liên hệ để tìm và nhận báo giá Bơm cánh gạt ANSON VP5F-A5-50 bạn đang cần.
Công ty chúng tôi chuyên cung cấp tất cả các loại vật tư – thiết bị dùng trong Công Nghiệp:
- Từ các linh kiện phụ kiện nhỏ dùng để sửa chữa thay thế cho đến máy móc nguyên chiếc dùng trong tự động hóa…
- Từ mặt hàng phổ thông cho tới các linh kiện khó tìm hiếm có nhất…
- Mua càng nhiều giá càng rẻ!
- Hàng hóa có xuất hóa đơn VAT và phiếu bảo hành đầy đủ.



: 0358 565 504
: 979 013579 8888
1012 414 927