Thông số kỹ thuật Bộ điều khiển Laser HL-AC1:
- Supply voltage: 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
- Current consumption: 190 mA or less (when connected to the sensor head)
- Measuring cycle:150 micros
- During current output: 4 to 20 mA/F.S., Maximum load resistance: 300 Ohm
- During voltage output: plus or minus 4 V/F.S., Output impedance 100 Ohm
- Maximum sink current: 50 mA
- Applied voltage: 30 V DC or less
- Residual voltage: 1.2 V or less
Main functions:
- Measured value display
- Setting value, light amount value resolution display
- Standard received light setting
- Automatic scaling
- Scaling
- Display reverse
- Display digits limitation
- Sample hold
- Peak hold
- ON-delay timer
- OFF-delay timer
- One-shot timer
- Threshold value direct setting
- Positioning teaching
- Automatic teaching
- Hysteresis width variability
- Laser deterioration detection
- Zero reset memory
- Mutual interference prevention
Tudongvina.com cung cấp tất cả các loại Bộ điều khiển Laser trên thị trường.Liên hệ để tìm và nhận báo giá loại bạn đang cần.
Công ty chúng tôi chuyên cung cấp tất cả các loại vật tư – thiết bị dùng cho các công trình Công Nghiệp:
- Từ các linh kiện phụ kiện nhỏ dùng để sửa chữa thay thế cho đến máy móc nguyên chiếc dùng trong tự động hóa…