AC Servo Drive Schneider LXM23DU04M3X
range of product |
Lexium 23 Plus
|
|
---|---|---|
product or component type |
Motion servo drive
|
|
device short name |
LXM23
|
format of the drive |
Book
|
|
---|---|---|
network number of phases |
Single phase
3 phases |
|
[Us] rated supply voltage |
220 V single phase (tolerance: – 10…15 %)
220 V 3 phases (tolerance: – 20…15 %) |
|
supply voltage limits |
200…255 V single phase
170…255 V 3 phases |
|
supply frequency |
50/60 Hz – 5…5 %
|
|
network frequency limits |
47.5…63 Hz
|
|
continuous output current |
2.6 A
|
|
continuous power |
400 W at 220 V
|
|
nominal power |
0.4 kW at 220 V
|
|
maximum leakage current |
3.5 mA
|
|
output voltage |
<= power supply voltage
|
|
electrical isolation |
Between power and control
|
|
type of cable |
Twisted shielded pairs cable (single or double) (temperature: 0…55 °C)
|
|
electrical connection |
Terminal, clamping capacity: 1.3 mm², AWG 16 (L1-L2)
Terminal, clamping capacity: 2.1 mm², AWG 14 (R, S, T) Terminal, clamping capacity: 0.82 mm², AWG 18 (U, V, W) Terminal, clamping capacity: 2.1 mm², AWG 14 (PA/+, PBe) |
|
tightening torque |
PE (ground): 1.4 N.m
|
|
discrete input number |
8 programmable discrete input(s)
|
|
discrete input type |
Programmable (CN1 terminals)
|
|
discrete input voltage |
12…24 V DC for logic
|
|
discrete input logic |
Positive or negative (CN1)
|
|
discrete output number |
5
|
|
discrete output type |
Logic output(s) (CN1)12…24 V DC
|
|
discrete output voltage |
12…24 V DC
|
|
discrete output logic |
Positive or negative (CN1)
|
|
analogue input number |
2
|
|
absolute accuracy error |
0.01 %
|
|
analogue input type |
V_REF voltage analog input: – 10…10 V, impedance: 10 kOhm
T_REF voltage analog input: – 10…10 V, impedance: 10 kOhm |
|
control signal type |
Servo motor encoder feedback
|
|
protection type |
Against reverse polarity: inputs signal
Against short-circuits: outputs signal Overcurrent: motor Overvoltage: motor Undervoltage: motor Overheating: motor Overload: motor Overspeed: motor Abnormal pulse control command: drive |
|
communication interface |
Modbus, integrated
|
|
connector type |
RJ45 (CN3) for Modbus
|
|
method of access |
Slave
|
|
physical interface |
2-wire RS485 multidrop for Modbus
|
|
transmission rate |
Configurable
|
|
status LED |
1 LEDcharge LED
|
|
signalling function |
Servo status and fault codes five 7-segment display units
|
|
marking |
CE
|
|
type of cooling |
Natural convection
|
|
operating position |
Vertical
|
|
width |
60 mm
|
|
height |
162 mm
|
|
depth |
146 mm
|
|
net weight |
1.7 kg
|
EMC filter |
Without EMC filter
|
|
---|---|---|
electromagnetic compatibility |
EMC immunity level 3 conforming to EN/IEC 61000-4-2
EMC immunity level 3 conforming to EN/IEC 61000-4-3 EMC immunity level 3 conforming to EN/IEC 61000-4-5 EMC immunity level 4 conforming to EN/IEC 61000-4-4 EMC immunity with additional EMC filter conforming to EN/IEC 61800-3 environments 1 and 2 Conducted and radiated emissions with additional EMC filter conforming to EN/IEC 61800-3 environments 1 and 2 category C2, C3 |
|
standards |
EN/IEC 61800-5-1
|
|
product certifications |
CULus 508
C-Tick |
|
IP degree of protection |
On upper part: IP20 (without protective cover)
On upper part: IP41 (with protective cover) |
|
vibration resistance |
0.075 mm peak to peak (f= 10…57 Hz) conforming to IEC 60068-2-6
1 gn (f= 57…150 Hz) conforming to IEC 60068-2-6 |
|
shock resistance |
15 gn for 11 ms conforming to IEC 60068-2-27
|
|
relative humidity |
Class 3K3 (5 to 85 %) without condensation or dripping water conforming to IEC 60721-3-3
|
|
ambient air temperature for operation |
0…55 °C conforming to UL
|
|
ambient air temperature for storage |
-20…65 °C
|
|
operating altitude |
<= 1000 m without derating
> 1000…2000 m with continuous power derating of 1 % per 100 m |
Package 1 Weight |
1.520 kg
|
---|
Warranty |
18 months
|
---|
Tudongvina.com cung cấp tất cả các loại AC Servo Drive trên thị trường. Liên hệ để tìm và nhận báo giá AC Servo Drive Schneider LXM23DU04M3X bạn đang cần.